DeWALT DWE7485 review – Table Saw for Jobsite

DWE7485 review

The DWE7485 DeWALT Mitre Saw features a tough 240v x 1850w motor for extended durability, efficiency, and power to cut all construction timbers out on site, a two-position fence with a maximum 610mm rip capacity, 65mm depth of cut at 90 degrees plus 45mm at 45 degrees, and one-handed bevel control for quick/accurate bevel adjustment and lock.

DeWALT Job Site Table Saws for a reason, they’re the workhorse of the woodworking and construction communities. A lot of things they get right. Your push stick, fence, riving knife, cable, and miter gauge may all be stored on board.

The DWE7485-240V DeWALT Table Saw also has a dual Rack and Pinion Fence System for increased accuracy, a No-Volt release switch for added safety, a cast aluminium bed for increased rigidity and improved accuracy, AIRLOCK compatible dust extraction for improved health/safety and cleaner job sites, and Tool Connect ready (tag is NOT included) for improved productivity.

For applications such as sizing paneling, flooring cutting, fitting units, shuttering boards, and cutting plinths, this DWE7485 Table Saw was specifically designed and manufactured for shop and kitchen fitters, exhibition contractors, general builders, flooring contractors, joiners, and cabinet makers.

DWE7485 review OSB Sheet

Dewalt DWE7485 Review

Portability

While the DWE7485 lacks the rollable stand seen on other DeWalt job-site table saws, it is significantly lighter. This instrument is light enough to take everywhere, weighing only 46 pounds.

However, Some did end up putting it on the rollable stand on my DWE7491RS. Our advise is to look into getting a stand for yourself. If money is tight, you can always make your own.

Comfort

The DWE7485 has a lower friction surface that helps to increase cutting performance across the board, in addition to the Modular Guarding System for tool-free adjustability.

It goes with the metal roll cage foundation, which is more stable and durable than the plastic base.

More critically, DEWALT has fitted the DWE7485 with a power-loss reset to deal with unintentional restarting of the unit after the power goes out.

When the electricity is restored, the saw will not automatically turn on again. Feel safe and protected!

Cut/Rip

In comparison to the previous iteration, the DWE7480, DEWALT appears to have reduced the blade size and weight of the DWE7485.

The blade is less than 9 inches long, as opposed to the DWE7480’s 10-inch blade. Is the cutting/ripping capacity therefore reduced?

Yes, it is correct! The 15Amp motor, on the other hand, is unchanged. In this case, a 5,800RPM no-load speed is superior.

As a result, it still has enough power to handle heavy work like cutting hardwood or plywood, and the cuts are quick, clean, and precise.

The DWE7485, on the other hand, has an exclusive fence arrangement that gives consumers maximum rip capacity.

The fence can be adjusted smoothly and precisely using rack and telescoping pinion fence rails. To rip fabrics, move the rails out of 20 inches, preferably 24.5 inches.

At a minimum, you can attain a cutting depth of 1-3/4 inch at 45° and 2-9/16 inch at 90°.

The cutting output is decent with a medium-range table saw, albeit it cannot compare to the DWE7480.

Safety

DeWalt’s Modular Guard System is featured on this table saw. Other safety measures include using a push stick instead of your hands to push the workpieces, anti-kickback pawls, and a riving knife.

Value

As far as we know, the DWE7485 is designed for mitering, non-through cutting applications (plastic, wood, and soft materials), ripping, and crosscutting by DEWALT’s construction professionals.

With such a diverse range of applications, many clients anticipate that this saw will be costly. That is a misinterpretation. Let us be honest with you.

The DWE7485 is not only lighter than its older sibling, the DWE7480, but it is also less expensive.

To own this saw, you simply need to pay a smaller price.

Dust Collection

There is one 2-1/2″ dust port available. This table saw does not include a dust bag, so if you plan to use it in your workshop and don’t already have one, you should consider purchasing one.

If you have a shop vac, make sure the port is compatible; if not, an adapter can be purchased.

Dewalt DWE7485 Review – Features and Benefits

This 8-1/4 in. Table Saw has on-board storage for the blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade-change wrenches, miter gauge, and push stick, maximizing accuracy and capacity.
Users may execute a variety of tasks with the powerful 15 Amp, 5800 rpm motor. The rack and pinion fence allows for quick and easy changes and can tear 4×8 sheet items.

Feature

  • Compact size for easy transportation and storage
  • Rack & pinion telescoping fence rails make fence adjustments fast, smooth, and accurate
  • 24.5 in. of rip capacity for ripping 4×8 plywood or OSB sheets
  • Power-loss reset prevents accidental restarts following a power disruption when the tool is left in the on position
  • Blade brake
  • On-board storage for guard, fence, wrenches, and miter gauge
  • Metal roll cage base for jobsite durability
  • Site-Pro Modular Guarding System allows for tool-free adjustments of the guarding

Applications

  • Flooring
  • Shelving
  • Window and Door Casing
  • Dimensional Lumber
  • Cabinet Work
  • Framing
  • Woodworking

Includes

  • (1) DWE7485 8-1/4 in. Table Saw
  • (1) Fence
  • (1) Anti-Kickback Pawls
  • (1) Miter Gauge
  • (1) Push Stick
  • (1) 8-1/4 in. Blade
  • (1) Non-Through Cut Riving Knife
  • (2) Blade-Change Wrenches
  • (1) Modular Guard System

Specifications

Arbor Size – 5/8″ Dust Port Diameter – 2.5″ Max Rip To Right Of Blade – 24.5″ Anti-Slip Comfort Grip – Yes Tool Length14.5″ Strokes/Min 0-2,900spm Amps 15Amps No Load Speed 5800rpm Tool Length 22.75″ Tool Height 13″ Blade Diameter 8-1/4″ Height 7.5 Tool Weight 5lbs  

The DeWALT DWE7485 – Verdict

Now that you’ve read about DWE7485 review, DeWalt produces high-quality, long-lasting, and dependable products, and the DWE7485 is no exception. A metal roll cage adds to the longevity of this product. Some of the components are composed of hard plastic.

The supplied miter gauge is weak and cheaply manufactured, but for a table saw at this price point, we can’t complain.

The DWE7485 is nearly identical to the now-discontinued DWE7480 and offers little new. But that doesn’t change the fact that it’s a good table saw at a reasonable price. This is a wonderful tool for professionals that need a portable table saw if you don’t mind the smaller blade.

DWE7485 review

DeWALT DWE7485 –
DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch


Maximized for accuracy and capacity this DEWALT DWE7485 8-1/4 inch table saw includes on-board storage for blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade change wrenches, miter gauge and push stick. The powerful DEWALT 15 amp, 5800 RPM motor allows users to complete a majority of applications. The rack & pinion fence allow for fast, easy adjustments and provides the capacity to rip 4×8 sheet goods.